Personal Protective Equipment (PPE)

• Hard Hats: To protect the head from falling objects and impacts.
• Safety Glasses/Goggles: To protect eyes from dust, debris, and chemical splashes.
• Hearing Protection: Earplugs or earmuffs to protect against loud noises.
• Respirators/Dust Masks: To protect against inhaling hazardous dust, fumes, and vapors.
• Gloves: To protect hands from cuts, abrasions, chemicals, and heat.
• Steel-Toe Boots: To protect feet from falling objects and punctures.
• High-Visibility Clothing: To ensure visibility around moving equipment and vehicles.
• Harnesses and Fall Protection Gear: When working at heights to prevent falls.

General Safety Practices

• FLHA’s: To identify and mitigate hazards
• Toolbox talks: To understand requirements and give feedback

Tool and Equipment Safety

• Inspect tools and equipment before use.
• Use the right tool for the job.
• Ensure power tools are grounded and cords are in good condition.

Working around utility Safety

• Be aware of overhead power/telecom lines and buried cables/gas.

Material Handling

• Lift with your legs, not your back.
• Get help with heavy or awkward loads.
• Use mechanical aids like forklifts and hoists when possible.

Hazard Communication

• Be aware of the Material Safety Data Sheets (MSDS) for hazardous materials.
• Use proper labeling and storage for chemicals.
• Follow safe handling procedures for hazardous materials.

Fire Safety

• Know the location of fire extinguishers and how to use them.
• Store flammable materials properly.
• Keep work areas free of ignition sources.

Site Safety

• Be aware of site-specific safety plans.
• Attend safety meetings and briefings.
• Report unsafe conditions and near-misses to supervisors.

Emergency Preparedness

• Know the emergency evacuation routes and procedures.
• Be familiar with first aid procedures and the location of first aid kits.
• Know how to contact emergency services.

Environmental Hazards

• Be aware of weather conditions and their impact on safety (e.g., wet, or icy surfaces).
• Use sun protection when working outdoors for extended periods.

 Housekeeping

• Keep work areas clean and free of debris.
• Store tools and materials properly to prevent tripping hazards.
• Dispose of waste materials appropriately.

Health and Wellness

• Stay Hydrated: Drink plenty of water, especially when working in hot conditions.
• Take Breaks: Regular breaks to prevent fatigue.
• Proper Nutrition: Eat balanced meals to maintain energy levels.

• Hammer: For driving nails and demolition.
• Screwdrivers: Both flathead and Phillips for driving screws.
• Wrenches: Adjustable, socket, and combination wrenches for tightening bolts and nuts.
• Pliers: Including needle-nose, slip-joint, and locking pliers for gripping, twisting, and cutting.
• Tape Measure: For accurate measurements.
• Utility Knife: For cutting materials such as drywall, insulation, and packaging.
• Chisels: For carving or cutting hard materials.
• Levels: Spirit levels or laser levels for ensuring surfaces are level and plumb.
• Hand Saw: For cutting wood and other materials.
• Pipe Wrench: For plumbing work.
• Concrete Tools: Such as trowels, floats, and edgers for concrete work.

• Drill/Driver: Corded or cordless for drilling holes and driving screws.
• Circular Saw: For cutting wood and other materials.
• Reciprocating Saw (Sawzall): For demolition work.
• Angle Grinder: For grinding, cutting, and polishing.
• Jigsaw: For cutting shapes and curves.
• Impact Driver: For driving screws and bolts with high torque.
• Rotary Hammer: For drilling into concrete and masonry.
• Nail gun: For carpentry use

• Square: Carpenter’s square, combination square, and framing square for marking and measuring right angles.
• Chalk Line: For marking straight lines over long distances.
• Laser Measure: For quick and accurate distance measurements.
• Plumb Bob: For ensuring vertical accuracy.
•  

• Flagging and hand signals: For working around equipment.
• Basic Skidsteer operation: basic controls and moving the Skidsteer around