5-Day Tool Safety & Operation Program (Without Skidsteer)

Training Program

Duration: 5 Days
Prerequisite: None

Program Start Date

January 2024

What does the 5-Day Tool Safety & Operation Program (Without Skidsteer) include?

Omnia Training's 5-Day Tool Safety and Operation Course equips participants with essential skills for the safe and effective use of hand and power tools across various trades and construction work. Day 1 focuses on comprehensive safety practices, including PPE use, hazard communication, and emergency preparedness. Day 2 covers the use and maintenance of small hand tools, while Day 3 transitions to power tools, teaching proficiency with drills, saws, grinders, and more. Day 4 emphasizes measuring and layout tools for precision, and Day 5 includes miscellaneous tools and a review of all previous lessons. This intensive program ensures participants are well-prepared for a safe and efficient work environment.

Training Program Outline:

Personal Protective Equipment (PPE)

  • Hard Hats: To protect the head from falling objects and impacts.
  • Safety Glasses/Goggles: To protect eyes from dust, debris, and chemical splashes.
  • Hearing Protection: Earplugs or earmuffs to protect against loud noises.
  • Respirators/Dust Masks: To protect against inhaling hazardous dust, fumes, and vapors.
  • Gloves: To protect hands from cuts, abrasions, chemicals, and heat.
  • Steel-Toe Boots: To protect feet from falling objects and punctures.
  • High-Visibility Clothing: To ensure visibility around moving equipment and vehicles.
  • Harnesses and Fall Protection Gear: When working at heights to prevent falls.

General Safety Practices

  • FLHA’s: To identify and mitigate hazards
  • Toolbox talks: To understand requirements and give feedback

Tool and Equipment Safety

  • Inspect tools and equipment before use.
  • Use the right tool for the job.
  • Ensure power tools are grounded and cords are in good condition.

Working around utility Safety

  • Be aware of overhead power/telecom lines and buried cables/gas.

Material Handling

  • Lift with your legs, not your back.
  • Get help with heavy or awkward loads.
  • Use mechanical aids like forklifts and hoists when possible.

Hazard Communication

  • Be aware of the Material Safety Data Sheets (MSDS) for hazardous materials.
  • Use proper labeling and storage for chemicals.
  • Follow safe handling procedures for hazardous materials.

Fire Safety

  • Know the location of fire extinguishers and how to use them.
  • Store flammable materials properly.
  • Keep work areas free of ignition sources.

Site Safety

  • Be aware of site-specific safety plans.
  • Attend safety meetings and briefings.
  • Report unsafe conditions and near-misses to supervisors.

Emergency Preparedness

  • Know the emergency evacuation routes and procedures.
  • Be familiar with first aid procedures and the location of first aid kits.
  • Know how to contact emergency services.

Environmental Hazards

  • Be aware of weather conditions and their impact on safety (e.g., wet, or icy surfaces).
  • Use sun protection when working outdoors for extended periods.

Housekeeping

  • Keep work areas clean and free of debris.
  • Store tools and materials properly to prevent tripping hazards.
  • Dispose of waste materials appropriately.

Health and Wellness

  • Stay Hydrated: Drink plenty of water, especially when working in hot conditions.
  • Take Breaks: Regular breaks to prevent fatigue.
  • Proper Nutrition: Eat balanced meals to maintain energy levels.
  • Hammer: For driving nails and demolition.
  • Screwdrivers: Both flathead and Phillips for driving screws.
  • Wrenches: Adjustable, socket, and combination wrenches for tightening bolts and nuts.
  • Pliers: Including needle-nose, slip-joint, and locking pliers for gripping, twisting, and cutting.
  • Tape Measure: For accurate measurements.
  • Utility Knife: For cutting materials such as drywall, insulation, and packaging.
  • Chisels: For carving or cutting hard materials.
  • Levels: Spirit levels or laser levels for ensuring surfaces are level and plumb.
  • Hand Saw: For cutting wood and other materials.
  • Pipe Wrench: For plumbing work.
  • Concrete Tools: Such as trowels, floats, and edgers for concrete work.
  • Drill/Driver: Corded or cordless for drilling holes and driving screws.
  • Circular Saw: For cutting wood and other materials.
  • Reciprocating Saw (Sawzall): For demolition work.
  • Angle Grinder: For grinding, cutting, and polishing.
  • Jigsaw: For cutting shapes and curves.
  • Impact Driver: For driving screws and bolts with high torque.
  • Rotary Hammer: For drilling into concrete and masonry.
  • Nail gun: For carpentry use
  • Square: Carpenter’s square, combination square, and framing square for marking and measuring right angles.
  • Chalk Line: For marking straight lines over long distances.
  • Laser Measure: For quick and accurate distance measurements.
  • Plumb Bob: For ensuring vertical accuracy.
  • Shovel: For digging and moving materials.
  • Wheelbarrow: For transporting materials.
  • Ladder: For reaching high places.
  • Caulking Gun: For applying sealants and adhesives.
  • Buckets: For carrying liquids and materials.
  • Brooms and Dustpans: For keeping the worksite clean.
  • Tool Belt: To keep tools handy.
  • Review of tools from previous days

Customizable 1-Day Course

For a shorter, focused session, we offer a 1-day course that can be customized to cover specific topics based on your needs. Whether you choose to include skid steer training or not, we can tailor the content to meet your requirements.

Flexible Training Options

We understand that training needs can vary. In addition to our standard 1-day and 5-day courses, we are flexible and can accommodate different durations and content based on your feedback and needs.

Copyright © OMNIA Training 2023